Terms & Condition
Because Federal, State or County laws and regulations may prohibit removal or modification of components that were installed on vehicles by their manufacturer to meet motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, BSH S&S recommends that vehicles which fall under these regulations and are equipped with parts designated “for off highway use” or “racing” not be operated on the public roads, and offers such parts only for track or off highway competitive or performance use only. Performance parts may exceed the design limits of the vehicle and its sub-systems. Suitability and implementation of parts is at the sole discretion of the buyer. Buyer agrees to operate the vehicle under the conditions set forth in this agreement and agrees to hold BSH S&S, its employees, officers and vendors harmless by reason of any claim, damages, accident or injuries resulting from the installation of the parts or the use of the vehicle with the installed parts.
BSH S&S does not endorse modification of vehicles for use on public highways where warranty or government regulations may be violated. As an express condition of sale of any performance part, buyer acknowledges and agrees to use the performance parts for the modification of vehicles in a manner consistent with any and all local and federal regulations and laws. Emission related after market parts that modify the emission control system may not be legal for sale or use on pollution controlled vehicles. The entire risk as to quality and performance parts is assumed by the buyer. In the event such parts prove defective following their purchase and installation, the buyer, and not BSH S&S assumes the entire cost of any necessary servicing, repair or replacement.
BSH S&S cannot confirm the price of an item until after the item is ordered. In the event that an item is listed at an incorrect price or with incorrect information due to an error in pricing or product information, BSH S&S shall have the right, at its sole discretion, to refuse or cancel any orders placed for that item. In the event that an item is mispriced, BSH S&S may, at its sole discretion, either contact buyer for instructions or cancel buyer’s order and notify buyer of such cancellation. Prices and availability are subject to change without notice. BSH S&S shall not be responsible for information provided by third parties (i.e. product specifications, delivery dates, etc.)
BSH S&S reserves the right, at its sole discretion, to refuse or cancel any order for any reason. Situations that may result in buyer’s order being canceled include but are not limited to limitations on quantities available for purchase, inaccuracies or errors in product or pricing information, or problems identified by our credit department. BSH S&S may also require additional verification or information before accepting any order.
Product Warranty and Disclaimer
Purchasers should recognize and understand that performance parts and equipment; such as, but not limited to, wheels, performance accessories, billet kits, clutches and all parts and services manufactured and/or sold by BSH Speedshop (BSH); are exposed to varied conditions due to the manner in which they are installed and used.
As further consideration for purchasers using BSH parts, equipment and services, purchasers acknowledge that due to the differing conditions and circumstances under which all products are installed and used, purchasers are not relying on BSH skill or judgment to select or furnish the proper product. Purchasers expressly affirm that they are relying upon their own skill and judgment to select and furnish suitable products.
BSH guarantees to the original purchaser of its BSH-manufactured steel and billet aluminum products a 1-year warranty against manufacturer defects in materials and workmanship under normal use. BSH makes no guarantee on the finish of the products. These warranties do not include shipping damage, improper maintenance, improper installation, road hazards, impairments from accidents, product modifications, or neglect. These warranties only apply to new products purchased, and are limited to the repair or replacement (at BSH’s option) of BSH products. These warranties do not cover the shipping costs for return, inconvenience or consequential damages. Original purchaser must return defective material, along with the purchase receipt and RGA number, to the original place of purchase or directly to BSH as advised by BSH. BSH is not responsible for products returned without a RGA number or products not originally purchased from BSH. All products redistributed by BSH (i.e., not manufactured by BSH), carry the warranty by the original manufacturer.
Installations must be performed according to instructions provided by or made available by BSH; otherwise, BSH has no responsibility. Failure to follow BSH provided instructions will VOID any and all product warranties and create liability for the installer.
In the event that purchasers or installers expressly cause representations, statements, or affirmations of fact contrary to this disclaimer of all warranties, expressed or implied, then purchasers or installer agree to indemnify and hold harmless BSH in the event of any claim, demand, or legal action against BSH by any purchaser.
Purchasers understand and agree that no officer, director, employee, salesperson, or representative of BSH has the authority to make any statement contrary to the terms of this agreement. BSH disavows any statement contrary to what is herein written.
Performance products by their nature are designed to increase horsepower and performance not engineered into the original vehicle and the increased stress could result in damage to related systems. These are high performance products – use at your own risk.
BSH assumes no responsibility for pricing misprints within this publication.
Lifetime warranty on BSH Engine Mounts
BSH S&S warrants all engine mount components against defect or failure for the life of the product for the original purchaser of the engine mount. Engine mounts must also be installed by a professional installer to ensure that engine mounts are installed according to instructions provided by or made available by BSH. All other terms and conditions in regard to product warranty remain the same.
Within 10 days of purchase, you may return a product ordered from our online store. Returned products must be in their original packaging with all instructions and warranty cards. All products must be complete and undamaged. Disassembled, damaged, attempted to install and custom products cannot be returned. If the return is due to an error by us, we will credit you for the return postage or freight, otherwise you are responsible for the return postage or freight. Returns are subject to a 20% restocking fee. No returns accepted on special orders. All items not BSH brand are considered special order unless otherwise noted. If you wish to return an item you must contact us prior to sending it out. Items shipped to us without prior authorization will be refused and returned to the shipper at the shippers expense. When a return is received it will be thoroughly inspected before any refund will be given. Should the item be deemed un returnable the item will be returned to the shipper at their expense.
If an item is returned by refusing the shipment, shipping costs on the return will be deducted from the amount returned to the customer.
Shipping is a fee paid to the provider for their service and is therefore non refundable. Shipping quotes generated by the website may not reflect actual cost. Actual shipping will be charged on each order. The customer will be notified of any discrepancy between website and actual.
Items from our webstore may be offered with free shipping. Free shipping means the cost of shipping is absorbed by the company not passed on to the customer. If an item listed as free shipping is returned to us the cost we paid for shipping is not refundable.
Items listed as free shipping only apply to the lower 48 states.
Within 3 days of receiving your items any missing items from the package must be made known to BSH. After this time period BSH is no longer responsible for items missing from original shipment. Claims of missing items must be supported with images of what was received.
All payments must be received and cleared in full before any item will be shipped. Payment methods accepted include all major credit cards, PayPal, money orders, and personal checks. Personal checks will be accepted on the terms that a thirty day period is required to allow the check to clear. Paypal E-Checks must also clear before the product can be shipped. No refunds will be given on uncleared funds.